TheNikon WR-R11a/WR-T10 Remote Controller Setis an all-in-one bundle for remote control in wireless photography.Nikon WR-R11a Remote ControllerDesigned for use withNikoncameras featuring a 10-pin connector, theWR-R11a Remote Controller can be used to wirelessly trigger the camera’s shutter when paired with the separate WR-T10 or WR-1 Wireless Remote Controller. It can also be used to trigger select radio-enabled flash units or as a master to trigger up to 64 transceiver units. Additionally, suiting its use in busier environments, three selectable radio frequencies are available for reliable use.Nikon WR-T10 Wireless Remote Controller TransmitterNikon’sWR-T10 Wireless Remote Controller Transmitteris a remote control transmitter designed to work with the Nikon WR-R10 Wireless Remote Controller transceiver (available separately): together, they control the shutter release on Nikon DSLR cameras wirelessly. The WR-T10/WR-R10 units use radio frequencies to communicate–you can trigger any number of Nikon DSLR cameras equipped with WR-R10 units, using one WR-T10 controller. The WR-T10 can control the shutter on an unlimited number of cameras with a paired WR-R10 unit attached. Three radio frequency channels are available for use, to prevent interference when multiple pairings or photographers are shooting in one location. Useful for triggering the shutter remotely when using slower shutter speeds, to prevent camera movement. Range from the WR-T10 to WR-R10s is 66 feet (20 meters).